Drilling

This is our original service from thirty-six years ago.  Drilling can be done on the chainrings, brake levers, dropouts and derailleurs.  We can drill holes so small that they are difficult to see.  Of course, you probably don't want them that small, but it should give you an idea of the different patterns that are possible.

Above is a basic pattern drilled into a Stronglight chainring using three hole sizes. 


Below are some patterns that you might want to consider (the first is the same as that used in the chainring pictured above), but you are not restricted to these.  We'll be glad to look at anything you might come up with.

 

 


Cutouts Etching Inlay Polishing Engraving Milling

Home Services Ordering About Links